Expert Waterproofing Services in Severna Park, MD — Licensed, Guaranteed, Fast
Arrow Tight Waterproofing deploys certified waterproofing crews across Severna Park, MD. We diagnose the moisture path, seal it at the source, and back every job with a written guarantee — no vague patches, no callbacks.
Arrow Tight Waterproofing: Severna Park, MD's Most Trusted Waterproofing Contractor
Arrow Tight Waterproofing was founded on one principle: a dry basement shouldn't be a luxury. Our crew of certified technicians covers Severna Park, MD with industrial waterproofing systems — the same membranes, drainage matting, and injection resins used in commercial construction, installed in your property at residential pricing.
We're not a general contractor who does waterproofing on the side. Every job we take — whether it's a sump system installation, a foundation crack repair, or full exterior waterproofing — is handled by specialists. No subcontracting, no handoffs, no surprises on the invoice.
✓ IICRC-Certified Waterproofing Technicians
✓ Commercial-grade materials on every residential job
✓ Permit-ready crews with full insurance documentation
✓ Transferable written warranty on all installed systems
Don't Wait — These Signs Mean Water Is Already Winning in Severna Park
Most basement floods don't start as floods. They start as these ignored details. If you see any of these in your Severna Park property, schedule a free inspection before the damage compounds.
1
Efflorescence on Block or Poured Walls
That white chalky residue isn't cosmetic — it's mineral salt deposited by water that has already penetrated your foundation wall.
2
Horizontal or Stair-Step Foundation Cracks
Vertical cracks are often settling. Horizontal cracks in block foundations indicate lateral soil pressure — a structural emergency, not just a cosmetic issue.
3
Musty Odor After Rain Events
If your basement smells earthy or musty after every heavy rain, active water intrusion is feeding organic growth — likely behind the drywall or under the slab.
4
Visible Seepage at Wall-Floor Joint
The cove joint — where the floor slab meets the foundation wall — is the most common water entry point in basement systems. Staining or pooling there means hydrostatic pressure is actively pushing in.
5
Peeling Paint or Bubbling Drywall
If interior basement paint is peeling or drywall is soft and bubbling, you have elevated relative humidity at the wall surface — a reliable sign of ongoing water vapor migration.
6
Sump Pump Running Constantly
Constant sump cycling means your drainage system is overwhelmed. This typically signals that your waterproofing perimeter needs to be upgraded, not just the pump.
7
Rust Stains on Concrete or Block
Iron in your concrete doesn't rust unless water penetration has reached it. Rust staining is a reliable indicator that your foundation waterproofing envelope has been breached.
8
Cracks in the Floor Slab
Hairline slab cracks that weep during wet weather indicate hydrostatic pressure building under the slab. Left alone, that pressure will widen the cracks and lift sections of the floor.
What We Do
Our Full Range of Waterproofing Solutions in Severna Park, MD
Every moisture problem has a different source. We identify yours specifically before we quote anything — then we deploy the right system, not the most expensive one.
💧
Interior Drain Tile & Perimeter Channel Systems
When hydrostatic pressure is the primary culprit, the most effective long-term solution is a properly engineered interior drainage system. We install sub-slab perforated drain tile around the perimeter of your basement — capturing water before it can rise above slab level — and route it to a sump pit equipped with a dual-pump configuration.
These systems don't fight hydrostatic pressure — they redirect it.
Exterior Foundation Coating & Drainage Board Installation
Exterior waterproofing is the most comprehensive solution available — stopping water before it contacts your foundation wall. We excavate to the footing, apply a rubberized polymer membrane to the exterior foundation face, install dimple-mat drainage board, and backfill with clean crushed stone to redirect surface water away from the structure.
This approach solves the problem at the source: water never reaches your interior wall surface.
Poured concrete foundation cracks are repaired from the interior using high-pressure polyurethane or epoxy injection — the appropriate chemistry depends on whether the crack is actively leaking or dry. Polyurethane foam expands into wet, actively leaking cracks and cures flexible, accommodating minor future movement. Epoxy injection is used in dry cracks where structural bond restoration is the goal.
Block wall repointing involves removing deteriorated mortar joints to a minimum depth of 3/4 inch and repacking with waterproof hydraulic mortar.
Crawl Space Moisture Control: Encapsulation to Full Waterproofing
We install a minimum 20-mil reinforced poly vapor barrier over the entire crawl space floor and seal it up the walls to the sill plate — then seal all vents, install a conditioned air supply or dedicated crawl space dehumidifier, and spec a sump system if groundwater is present.
Encapsulation turns your crawl space from an uncontrolled dirt floor into a semi-conditioned space.
Sump Pit Construction & Dual-Pump Waterproofing Systems
A sump pump is only as reliable as its installation and backup plan. We install primary pumps — typically 1/2 to 3/4 HP cast iron submersibles with a minimum 10-year rating — alongside battery-operated backup systems that activate automatically when your primary pump fails or power goes out.
Sump pump replacement is one of the most time-sensitive repairs in waterproofing — a failed pump during a heavy rain event means an immediate flood.
Window Well Drainage & Egress Window Waterproofing
We excavate and regrade window wells to the proper dimension, install a gravel drain bed with a perforated pipe tied into your perimeter drainage system, and apply waterproof flashing around the window frame — stopping the entry point at the source instead of managing it inside.
Egress window installations create a significant opening in your foundation wall, and sealing the rough opening properly is as important as the window itself.
Why Severna Park Property Owners Choose Arrow Tight Waterproofing Over the Competition
There are a lot of waterproofing companies in MD. Here's what separates the ones who fix the problem from the ones who fix the symptom — and why Arrow Tight Waterproofing consistently lands on the right side of that line.
01
No Guessing — We Measure Moisture Before We Scope
Our process starts with a thermal imaging scan and moisture meter readings at the wall surface, floor, and any visible crack or staining.
02
We Use the Same Products as Commercial Contractors
We purchase materials from professional waterproofing suppliers, not retail channels.
03
We Pull Permits. We Carry Coverage. We're On Record.
Every technician on our crews is a direct employee of Arrow Tight Waterproofing, insured under our policy, and trained to our installation standards.
04
Fixed-Price Proposals Before Any Work Begins
We quote a fixed scope and a fixed price before any work begins.
05
Our Guarantee Goes With the House, Not the Homeowner
We put our warranty in writing, registered to your property address, with a clear scope of what's covered and the process for filing a service claim.
06
24/7 Emergency Response Across Severna Park, MD
Water emergencies don't schedule themselves around business hours.
What to Expect When You Call Arrow Tight Waterproofing
1
Call Us — We Answer 24/7
Reach our live dispatch team at any hour. We'll take your address, ask about what you're seeing, and schedule a free on-site inspection — typically within 24 hours or same-day for emergencies.
2
On-Site Moisture Assessment
Your technician inspects the perimeter, scans the walls with thermal imaging, measures moisture content at every crack and stain, and maps the likely water path from grade to interior. This takes 45–90 minutes and is completely free.
3
Fixed-Price Proposal — Before We Touch Anything
The proposal covers every item: materials, drainage footage, labor, discharge routing, and any permit fee. The number on the proposal is the number on the invoice.
4
Your System Is Installed, Tested, and Guaranteed
{Our crew completes the installation to the approved scope. On completion, we conduct a post-installation moisture check, walk you through the system, and provide the written warranty documents registered to your property address.|Installation is completed by our direct-employee crew. We clean up the jobsite, verify pump function and discharge routing, take post-install moisture readings, and hand you the warranty documentation before we leave.}
Don't Wait for the Next Rain Storm — Call Arrow Tight Waterproofing Today
If you've noticed any of the warning signs above, the damage is compounding with every wet event. A free inspection costs you nothing; a delayed repair can cost thousands more.
What Severna Park, MD Homeowners Say About Arrow Tight Waterproofing
★★★★★
"The crew showed up within 3 hours of my call at 9 PM on a Tuesday. I had water coming in through a crack in my poured wall at the floor joint — had been watching it for two seasons and finally called when it started spreading. They installed an interior drain system along two walls and a new sump pit. The work took two days. I've had three major rain events since then — completely dry. Worth every dollar.Highly recommend the whole crew."
M
Michael R.Basement Waterproofing Client
★★★★★
"I've had two other companies look at my foundation crack before these guys. Both gave me vague proposals and neither one could tell me exactly why I had water or where it was coming in. Arrow Tight Waterproofing came out, brought a thermal camera, and showed me on screen exactly where the moisture was concentrated. The polyurethane injection they did on the crack has held for 18 months now with zero seepage. That's the most competent inspection I've ever gotten from a contractor.That kind of result speaks for itself."
S
Sandra T.Foundation Crack Repair Client in Severna Park, MD
★★★★★
"I bought a house in Severna Park, MD knowing it had a moisture issue in the crawl space — previous owners had put down a thin plastic sheet that was doing nothing. Arrow Tight Waterproofing encapsulated the entire crawl space with a 20-mil liner, sealed the vents, and installed a dehumidifier. Within two weeks my downstairs floors stopped feeling cold and damp and the musty smell completely disappeared. The technician walked me through every step before starting. No surprises on the invoice.That kind of result speaks for itself."
D
David K.Homeowner in Severna Park, MD
★★★★★
"We had a window well that flooded every time we got more than an inch of rain. The well was filling up and water was coming straight in through the window sill joint. The fix was a regraded well with a perforated pipe tied into our existing interior drain. The whole job took one day. The crew was professional, cleaned up completely, and the well has handled every storm since without an issue.I'd recommend them to anyone dealing with the same problem."
L
Lisa M.Homeowner
★★★★★
"Called Arrow Tight Waterproofing after my old sump pump failed during a storm and I had 4 inches of water on my basement floor. They answered at midnight, arrived within an hour, and had a temporary pump running within 20 minutes of showing up. Once the emergency was managed, they walked me through a permanent drainage system upgrade. That was 8 months ago — I've had 6 rain events including one significant storm and the basement has stayed dry.That kind of result speaks for itself."
J
James W.Homeowner
★★★★★
"As a commercial property manager overseeing several buildings in Severna Park, MD, I've worked with a lot of waterproofing contractors. Arrow Tight Waterproofing is the first one that showed up to the initial walk with a written inspection checklist and completed it on-site before quoting. Every other contractor just eyeballed it and sent a number. Their exterior membrane on the building we had done 3 years ago is holding perfectly with zero callbacks.That kind of result speaks for itself."
A
Angela F.Commercial Property Manager in Severna Park, MD
Common Questions
Waterproofing FAQ — Answers From Arrow Tight Waterproofing Technicians
Interior drainage is the right solution when your water entry is at the floor-wall joint, through the slab, or at the lower portion of the wall due to hydrostatic groundwater pressure. Exterior waterproofing is indicated when the problem originates at the exterior wall face.
Interior drain tile systems typically take 1–2 days depending on perimeter footage; full exterior excavation runs 2–5 days depending on footer depth.
A professionally waterproofed basement with a transferable warranty is a selling feature, not just a repair. It eliminates a mandatory disclosure item, removes a negotiation point for buyers, and makes finished basement space more credibly usable in appraisals.
Homeowner's policies typically cover sudden water damage — burst pipes, appliance failures — but exclude gradual seepage and groundwater intrusion. That said, we document every job with moisture readings and photographs.
Waterproofing costs vary significantly based on the solution required, the perimeter footage, and the existing drainage conditions. Interior drain tile systems for a standard residential basement typically run $4,000–$12,000.
Damp-proofing is a coating — typically an asphalt-based spray applied to the exterior of a new foundation during construction. It slows vapor transmission but is not designed to withstand hydrostatic pressure; it cracks, deteriorates, and fails over time.
For interior work, displacement is rarely required. There will be concrete saw noise and dust during the initial saw-cut phase — we use HEPA-equipped dust containment systems — but most homeowners remain in the house throughout an interior drainage installation.
Poured concrete cracks primarily from shrinkage during initial cure, differential settlement as soil compacts beneath the footer, and thermal cycling over seasons. Concrete block cracks most commonly at mortar joints due to differential settlement or from lateral soil pressure.
Interior waterproofing work — drain tile installation, sump systems, crack injection — can be performed year-round regardless of weather.
A properly installed interior drainage system and sump pump system requires minimal maintenance, but that minimal maintenance matters. Test your sump pump every 6 months by pouring water into the pit.
Yes — and this is one of the most consistent findings in building science research. An unencapsulated crawl space with no standing water still pushes humid ground-sourced air into your living area through the stack effect: warm air rising out of the house pulls cool.
Service Area
Arrow Tight Waterproofing Serves All of Severna Park, MD — Including Severna Park
Arrow Tight Waterproofing provides Waterproofing services across the full extent of Severna Park, MD. Whether you're in a densely populated metro area or a rural property 40 miles from the nearest hardware store, our crews are dispatched from regional staging points to keep response times short and service costs predictable.
Our Severna Park team handles everything from single-family residential basements to commercial foundations. If you're in Severna Park, MD and have a water intrusion problem, we service your area. Call +1-866-476-1348 to confirm your address is covered — it almost certainly is.
Basement WaterproofingFoundation Crack RepairCrawl Space EncapsulationSump Pump SystemsExterior WaterproofingWindow Well DrainageEmergency ResponseCommercial Properties
